Distech Procedure Earloop Face Masks ASTM F2100 Level 1 Barrier Protection. The masks meet the criteria of ASTM F2100. (level 1 is sufficient). Procedure masks are intended to be worn by personnel during medical procedures to protect both the patient and the operating personnel from transfer of microorganisms, body fluids and particulate matter. Latex free.
Acceptable limits: Bacteria Wide ≥ 95%
Acceptable limits: ΔP < 5.0 mm of H2O/cm2
Acceptable limits: EFP @ 0.1 μm large Latex particules ≥ 95%
Acceptable limits: @ 80mmHg minimum
Acceptable limits: Flame spread, Class I
Material Composition :
Filter Layer: Meltblown Polypropylene (MBPP)
Inner Material: Spunbond Polypropylene (SBPP)
Width: 90 – 100 mm (3 1/2” – 3 7/8”)
Warnings :
- Bacterial Filtration Efficiency (BFE):
Acceptable limits: Bacteria Wide ≥ 95%
- Sub-micron Particulate:
Acceptable limits: ΔP < 5.0 mm of H2O/cm2
- Filtration Efficiency (PFE) :
Acceptable limits: EFP @ 0.1 μm large Latex particules ≥ 95%
- Resistance to penetration by synthetic blood :
Acceptable limits: @ 80mmHg minimum
- Textile flammability :
Acceptable limits: Flame spread, Class I
- Differential Pressure (ΔP) :
Material Composition :
- Mask Body :
Filter Layer: Meltblown Polypropylene (MBPP)
Inner Material: Spunbond Polypropylene (SBPP)
- Nose-Piece :
- Earloop :
- Color blue
- Body Size :
Width: 90 – 100 mm (3 1/2” – 3 7/8”)
- Length of Earloop: 145 – 185 mm (5 11/16” – 7 1/4”)
- Length of Nose-piece: 90 – 120 mm (3 1/2” – 4 3/4”)
Warnings :
- Store under cool, clean, and dry conditions.
- Avoid excessive heat (over 40°C or 104°F).
- Do not use in the presence of high intensity heat source or flammable gas.
Installation kit
An installation kit is needed for proper installation on your vehicle
Installion Kit Available
Choose your vehicle
Vehicle |
|
|